產品展示
{pboot:if(


By the adequate stirring from the bottom and the adhesives (or cream) sprayed by pressure, the materials in the cone container are mixed into a moist and soft state. With the cutting of the high-speed cutting tool on the side, the materials turn into uniform granules. The granules are straightened during the discharging of the material. By controlling the granule number, different granules can be made.



>0)} 工作原理 {/pboot:if} {pboot:if(

?The main barrel: The tangential structure between the cylinder and the cone is adopted, which is good for stirring materials. The angle between the stirring paddle and the parting tool is rationally designed, which ensures the optimized effect of mixing and granulating.
?The cutting tool is installed aslant to the straight wall of the barrel, which increases the contacting area between the parting tool and the materials and improves the uniformity of the granules. Besides, the aslant installation of the parting tool can prevent the materials from being sprayed to the cover of the barrel, avoiding the old problem of the traditional cutting.
?The efficiency of every new batch can be 4 to 5 times higher than that of the traditional technique.
?The whole granulating process of dry mixing and wet mixing is completed in a same airtight container, saving 25% of the adhesives and some drying time when compared with the traditional one.
?Operation controlling system: It is controlled by a computer with a touch screen, providing storage space for technical data of several processes. The parting tool adopts frequency speed, allowing free adjustment on its revolving speed, which meets the requirements of different granulating.

>0)} 特點 {/pboot:if} 主要技術參數 在線詢盤 其它產品
Model JHZ-D Series High-efficient Wet-process Granulator

Model JHZ-D Series High-efficient Wet-process Granulator

    我要分享:
is dedicated equipment used for the wet mixing granulating of powder, starch, adhesives and cream in food, pharmacy and chemistry industries.
{pboot:if(


By the adequate stirring from the bottom and the adhesives (or cream) sprayed by pressure, the materials in the cone container are mixed into a moist and soft state. With the cutting of the high-speed cutting tool on the side, the materials turn into uniform granules. The granules are straightened during the discharging of the material. By controlling the granule number, different granules can be made.



>0)}
工作原理


By the adequate stirring from the bottom and the adhesives (or cream) sprayed by pressure, the materials in the cone container are mixed into a moist and soft state. With the cutting of the high-speed cutting tool on the side, the materials turn into uniform granules. The granules are straightened during the discharging of the material. By controlling the granule number, different granules can be made.



{/pboot:if} {pboot:if(

?The main barrel: The tangential structure between the cylinder and the cone is adopted, which is good for stirring materials. The angle between the stirring paddle and the parting tool is rationally designed, which ensures the optimized effect of mixing and granulating.
?The cutting tool is installed aslant to the straight wall of the barrel, which increases the contacting area between the parting tool and the materials and improves the uniformity of the granules. Besides, the aslant installation of the parting tool can prevent the materials from being sprayed to the cover of the barrel, avoiding the old problem of the traditional cutting.
?The efficiency of every new batch can be 4 to 5 times higher than that of the traditional technique.
?The whole granulating process of dry mixing and wet mixing is completed in a same airtight container, saving 25% of the adhesives and some drying time when compared with the traditional one.
?Operation controlling system: It is controlled by a computer with a touch screen, providing storage space for technical data of several processes. The parting tool adopts frequency speed, allowing free adjustment on its revolving speed, which meets the requirements of different granulating.

>0)}
特點

?The main barrel: The tangential structure between the cylinder and the cone is adopted, which is good for stirring materials. The angle between the stirring paddle and the parting tool is rationally designed, which ensures the optimized effect of mixing and granulating.
?The cutting tool is installed aslant to the straight wall of the barrel, which increases the contacting area between the parting tool and the materials and improves the uniformity of the granules. Besides, the aslant installation of the parting tool can prevent the materials from being sprayed to the cover of the barrel, avoiding the old problem of the traditional cutting.
?The efficiency of every new batch can be 4 to 5 times higher than that of the traditional technique.
?The whole granulating process of dry mixing and wet mixing is completed in a same airtight container, saving 25% of the adhesives and some drying time when compared with the traditional one.
?Operation controlling system: It is controlled by a computer with a touch screen, providing storage space for technical data of several processes. The parting tool adopts frequency speed, allowing free adjustment on its revolving speed, which meets the requirements of different granulating.

{/pboot:if}
主要技術參數

在線詢盤

歡迎您發送【在線詢盤】!您有任何關于我司產品的建議及問題,可通過jp@cnjianpai.com給我們發郵件,也可通過此詢盤向我們反饋;我們將在24小時內給您回復。(周一至周五9:00—17:30)

  • 標題:
  • *姓名:
  • *郵箱:
  • 公司名稱:
  • 電話:
  • 傳真:
  • 所在地:
  • 內容:
  • 驗證碼:

其它產品

  • Model JHZ-D Series High-efficient Wet-process Granulator

  • Model JFL Series High-efficient Boiling Granulator

  • Model JFG-C Series High-efficient Boiling Drying Machine

  • Model JHZ-K Series Lab Wet-process Granulator

  • Model JYK Series Oscillating Granulator

  • Model JFZ/B Series Grinding Granulator

  • Model JZL Series Door Type Granulator